Filters

List of chemical balance Tenders

List of latest chemical balance Tenders in Indian Tenders. Click on any chemical balance Tenders to view BOQ, NIT and Tender Documents. Get GeM Registration and Bidding Support, Vendor Registration for chemical balance Tenders.

All-Tenders (4)
|
Today's-Tenders
|
Active-Tenders
|
Closed-Tenders

Central Government/Public Sector

TRN :36209335 | 14 Jan, 2026

Tender Value : 0

Bhubneshwar - Orissa

Tender for gem bids for chemicals, spec sheet attached, as per spec sheet attached, as perboq sheet attached, see attached boq spec sheet, specpdf attached1-butyl-3-methylimidazolium chloride,, 2, 2-diphenyl-1-picrylhydrazyl, acetyl chloride, choline chloride> 98%, ironiii chloride, reagent grade, 97%, ironii chloride, anhydrobeadstm, hydroxylaminehydrochloride, 2-propanol, > 99.5%, a.c.s. reagent, l-asparagine, > 98% hplc, heptadecanoic acidmethyl ester, sodium phosphate monobasic, oxalicacid, 98%, phenol red, bioreagent cell culture, phosphoric acid, 85 wt. % solution in, potassiumiodide, reagentplus, 99%, potassium sulfate, reagentplusr, sulfuric acid, acs reagent, 95.0-98.0%, zinc sulfate heptahydrate,, amberlite xad-2, 500g, iodine, reagentplusr, 99.8% titratio, hepessolution bioxtra, 1 m, ph 7.0-7.6&, acrylamide, piperlongumine 1pc x 25mg, advanced pap pen, formalin solution, neutral buffered,, hepes, bioperformance certified&, hanks balanced saltsolution,, sodium bicarbonate, powder,, ethyleneglycol-bisb-aminoethyl, sodiumhydrogenphosphate, 99.95%, magnesium sulfateheptahydrate, 98+%,, dnase i, grade ii, protease typexiv bacterial from, collagenase d, 2.5g, non-sterile, optiprep density gradient medium,, sb-505124 hydrochloride hydrate, oridonin, hif-1inhibitor, carbonyl cyanide 3-, lysostaphin fromstaphylococcus, anti-fluorescein-ap fabfragments, fluorescein rna label.mix 10x, rnapolymerase, sp6, 1000 u, dig rna labeling mix, 10x, 40ul, rna polymerase, t7, 1000 u, pronase, lyo. 5 g, bmpurple ap substrate, precipitating, proteinase /bid number: gem/2025/b/7036033* /dated: 23-12-2025 & & / bid document1 / 101

State Government

TRN :36181434 | 08 Jan, 2026

Tender Value : 0

Chandigarh Ut - Chandigarh

Tender for gem bids for heparin injection q2 % % % % 3 3 0 0 /minimum averageannual turnover of the bidder for 3 years3 lakh s % % % % 3 3 0 0 /oem averageturnover last 3 years15 lakh s % % 6 76 7 / mse relaxation for turnoveryes | complete % % & % & % 6 76 7 / startup relaxation for turnoveryes | complete 9 9 & & /document required from sellerbidder turnover, certificate requested in atc, oem authorization certificate, oem annualturnoverin case any bidder is seeking exemption from experience / turnover criteria, thesupporting documents to prove his eligibility for exemption must be uploaded forevaluation by the buyer; ; > > ? ? & & @ @ ? ? b b? ? % % /do you want to showdocuments uploaded by bidders to all bidders participated in bid?yes documents submitted as part of a clarification or representation during thetender/bid process will also be displayed to other participated bidders after log in & & f f g g /minimum number of bids required to disable automatic bidextension1? ? g g, , j j -- / / number ofdays for which bid would be auto--extended7 ; @ ; @ ? ? ? ? / / number of autoextension count1 n %n % ?9 ?9 ? ? /bid to ra enabledyes & & / bid document1 / 11 n %n % o o /ra quali cation ruleh1-highest priced bid elimination 6 6 /type of bidtwo packet bid p p & r & r /time allowedfor technical clarifications during technical evaluation2 days s s f f t t s s 6 6 / % % @ @ > > /inspection required by empanelled inspection authority /agencies pre-registered with gemno p p t t /evaluation methodtotal value wise evaluation w & w & /arbitration clauseyes arbitration clause document as per doe om no.f.1/2/2024-ppd dated 03.06.2024arbitration should not be routinely included in contracts /mediation clauseno //bid details /emd detail b /advisory bankstate bank of india /emd amount11838 /epbg detail b /advisory bankstate bank of india 6 %/epbg percentage%5.00 f /duration of epbg required months.7a. 0 z % & 6& % & % 6 b n /emd exemption: the bidder seeking emd exemption, must submit the valid supportingdocument for the relevant category as per gem gtc with the bid. under mse category, only manufacturers for goods and service providers for services are eligible forexemption from emd. traders are excluded from the purview of this policy.b. , , \ s @ ? / emd & performance securityshould be in favour of bene ciary, wherever it is applicable. \ \ /beneficiary : director principal gmch 32 chandigarhgovernment medical college and hospital, sector 32, chandigarhprof gp thami ? / bid splitting not applied. / mii purchase preference / mii purchase preferenceyes2 / 11 ? 9 @ 6, ? p l1+x% @ / purchase preference to mii sellers availabele upto price withinl1+x%20 ? @ 6 6 /maximum percentage of bid quantity for mii purchase preference50 % - - ? 6 2017 ; 1/; 2 & % % ? 16.09.2020 - / allow participation only fromclass 1/class 2 local suppliers as per the public procurementpreferenceto make-in-india order 2017 date 16.09.2020as amended and applicabletime to timeyes, in compliance with the mii order : dpiit orderas amended and applicable time totime /mse purchase preference /mse purchase preferenceyes e g % @ 6, ? p l1+x% @ / purchase preference to mse oems availableupto price within l1+x%15 e g @ 6 6 / maximum percentage of bid quantity for mse purchasepreference251. if the bidder is a micro or small enterprise mse as per latest orders issued by ministry of msme, the bidder shall be relaxed from the eligibility criteria of bidderturnover as defined above subject to meeting of quality and technical specifications. if the bidder itself is mse oem of the offered products, it would be relaxed fromthe oem average turnover criteria also subject to meeting of quality and technical specifications. the bidder seeking relaxation from turnover, shall upload thesupporting documents to prove his eligibility for relaxation.2. if the bidder is a dpiit registered startup, the bidder shall be relaxed from the the eligibility criteria of bidder turnover as defined above subject to their meeting ofquality and technical specifications. if the bidder is dpiit registered oem of the offered products, it would be relaxed from the oem average turnover criteria alsosubject to meeting of quality and technical specifications. the bidder seeking relaxation from turnover shall upload the supporting documents to prove his eligibility forrelaxation. 3. the minimum average annual financial turnover of the bidder during the last three years, ending on 31st march of the previous financial year, should be as indicatedabove in the bid document. documentary evidence in the form of certified audited balance sheets of relevant periods or a certificate from the chartered accountant /cost accountant indicating the turnover details for the relevant period shall be uploaded with the bid. in case the date of constitution / incorporation of the bidder is lessthan 3-year-old, the average turnover in respect of the completed financial years after the date of constitution shall be taken into account for this criteria. 4. oem turn over criteria: the minimum average annual financial turnover of the oem of the offered product during the last three years, ending on 31st march of theprevious financial year, should be as indicated in the bid document. documentary evidence in the form of certified audited balance sheets of relevant periods or acertificate from the chartered accountant / cost accountant indicating the turnover details for the relevant period shall be uploaded with the bid. in case the date ofconstitution / incorporation of the oem is less than 3 year old, the average turnover in respect of the completed financial years after the date of constitution shall betaken into account for this criteria. 5. preference to make in india products for bids < 200 crore:preference shall be given to class 1 local supplier as defined in public procurement preference to makein india, order 2017 as amended from time to time and its subsequent orders/notifications issued by concerned nodal ministry for specific goods/products. theminimum local content to qualify as a class 1 local supplier is denoted in the bid document. if the bidder wants to avail the purchase preference, the bidder mustupload a certificate from the oem regarding the percentage of the local content and the details of locations at which the local value addition is made along with theirbid, failing which no purchase preference shall be granted. in case the bid value is more than rs 10 crore, the declaration relating to percentage of local content shallbe certified by the statutory auditor or cost auditor, if the oem is a company and by a practicing cost accountant or a chartered accountant for oems other thancompanies as per the public procurement preference to make-in -india order 2017 dated 04.06.2020. only class-i and class-ii local suppliers 4.6.2020 will be eligible to bid. non - local suppliers as per mii order dated 04.06.2020 are not eligible to participate. however, eligible micro and small enterprises willbe allowed to participate .the buyers are advised to refer the om no.f.1/4/2021-ppd dated 18.05.2023. om no.1 4 2021 ppd dated 18.05.2023concurrent application of public procurement policy for micro and small enterprises order, 2012 and public procurement preference to make in india order, 2017. 6. purchase preference to micro and small enterprises mses: purchase preference will be given to mses as defined in public procurement policy for micro and smallenterprises mses order, 2012 dated 23.03.2012 issued by ministry of micro, small and medium enterprises and its subsequent orders/notifications issued byconcerned ministry. if the bidder wants to avail the purchase preference, the bidder must be the manufacturer of the offered product in case of bid for supply of goods.3 / 11 traders are excluded from the purview of public procurement policy for micro and small enterprises. in respect of bid for services, the bidder must be the serviceprovider of the offered service. relevant documentary evidence in this regard shall be uploaded along with the bid in respect of the offered product or service. if l-1 isnot an mse and mse seller s has/have quoted price within l-1+ 15% of margin of purchase preference /price band defined in relevant policy, such seller shall begiven opportunity to match l-1 price and contract will be awarded for 25 % percentage of total quantity.the buyers are advised to refer the dated 18.05.2023. om no.1 4 2021 ppd dated 18.05.2023 for compliance of concurrent application of public procurement policy for micro and small enterprisesorder, 2012 and public procurement preference to make in india order, 2017. 7. estimated bid value indicated above is being declared solely for the purpose of guidance on emd amount and for determining the eligibility criteria related to turnover, past performance and project / past experience etc. this has no relevance or bearing on the price to be quoted by the bidders and is also not going to have anyimpact on bid participation. also this is not going to be used as a criteria in determining reasonableness of quoted prices which would be determined by the buyerbased on its own assessment of reasonableness and based on competitive prices received in bid / ra process. 8. reverse auction would be conducted amongst all the technically qualified bidders except the highest quoting bidder. the technically qualified highest quotingbidder will not be allowed to participate in ra. however, h-1 will also be allowed to participate in ra in following cases:i. if number of technically qualified bidders are only 2 or 3.ii. if buyer has chosen to split the bid amongst n sellers, and h1 bid is coming within n.iii. in case primary product of only one oem is left in contention for participation in ra on elimination of h-1.iv. if l-1 is non-mse and h-1 is eligible mse and h-1 price is coming within price band of 15% of non-mse l-1v. if l-1 is non-mii and h-1 is eligible mii and h-1 price is coming within price band of 20% of non-mii l-1heparin injection 7200 pieces 9 9 1 2 & & % % % % h h @ @ % % 6 76 7 f f /minimum 50% and 20% local content required for qualifying as class 1 and class2 local supplier respectively r r /technical specifications r / as per gem category speci cation /speci cation r r /specification name f f p p product informationmedicine nameheparindosage forminjectionstrength5000 iu/mlcompliance to uploaded special terms andconditionsyespackagingtype of primary packingvialprimary pack size5 mlcertifications & reportsavailability of valid drug manufacturing licenseissued from the competent authority definedunder drugs and cosmetic act and rules thereunder as amended till dateyessubmission of all necessary certifications, licenses and test reports to the buyer as perbuyer requirement at the time of bid submissionand along with suppliesyesshelf lifeshelf life in months from the date ofmanufacture24, 36 or higher month //n ? j n ? j /consignees/reporting officer and quantity4 / 11 . .9. ./s.no. //n ? j n ? j /consigneereporting/officer /address? ? ? ? g g @ @ 1kuldeep kaur160031, government medical college & hospitalsector 32, chandigarh, 160031 /quantity36003600special terms and conditions-version:1 effective from 14-11-2025 for category heparin injection1. 1. the sellers are registered on gem and exempted from the vendor assessment process based on the undertaking & submitted copy of a validmanufacturing drug license certified by the issuing authority. buyers must mandatorily ask for submitting the relevant valid drug license and otherregulatory documents applicable with the bid. buyers must also check and validate the details e.g., validity, authenticity/genuineness, name of thedrug/medicine under procurement, the license issuing authority etc. at their end.2. the buyer shall ask the seller to submit the notarized undertaking in the mentioned below format scanned copy and hard copy. details of the samemay be verified by the buyer at their end.undertakingto be on non-judicial stamp paper of rs 10 and notarized i, , s/o / d/o / w/o , aged about resident of , do hereby declare andundertake that;1. i am the partner / proprietor / director of name of entity and duly authorized to sign this undertaking on behalf of . name of entity2. we are the manufacturers of the drug/medicine product and intend to offer the same for sale through the gem portal.3. we state that the license for the product has been granted/obtained by us as per the provisions of the drug & cosmetics act, 1940 and rules framedthere under as amended till date.4. we further state that the details regarding the product/licenses have been uploaded by us on the online sugam portal of cdsco as per rule 84abof the drugs and cosmetics rules, 1945 as amended till date. reference no. for sugam portal is .5. we undertake that all the information provided above is true and complete in all respect. we understand that in the event any falseinformation/declaration is provided by us, suitable legal action/action as per drugs and cosmetics act, 1940 as amended till date and rules madethere under will be initiated. place: date: .. signature, name, designation & seal on behalf of the manufacturer3. all provisions of drugs and cosmetics act, 1940 and rules made there under as amended till date will always be applicable. this will include allnotifications issued by central drugs standard control organization cdsco, ministry of health & family welfare mohfw and department ofpharmaceuticals dop, ministry of chemicals & fertilizers time to time in this regard.4. all provisions of narcotic drugs & psychotropic substances act, 1985 as amended till date will also be applicable in case of narcotic drugs & psychotropicsubstances.5. the purchase shall be made through bidding/ra only irrespective of the value.6. manufacturer shall have a valid own manufacturing license issued by the competent drug licensing authority defined under the drugs and cosmetics act1940 and rules made there under as amended till date. the drug/medicine quoted should be clearly marked and highlighted in drug manufacturinglicense. the valid own manufacturing license shall be submitted to the buyer at the time of bid submission/delivery as per buyer requirement.5 / 11 in case of authorized resellers/distributors, it will be the legal & regulatory liability of the manufacturer to ensure that their authorized resellers/distributorsare operating in compliance with all relevant laws and regulations and are properly licensed to sell the manufacturers products.manufacturer shall be responsible for verifying the validity and authenticity of drug license held by their authorized resellers/distributors.if revalidation of drug license has been applied for, the buyer shall be informed accordingly and the copy of application to state drug / licensing authoritymust be submitted with a certificate that application for renewal was made within time frame as per drug and cosmetic act as amended up to date andthat has not been deleted by drug licensing authority.7. bidder/seller shall submit the valid gmp/who-gmp certificate of the manufacturing site as per revised schedule- m for the quoted drugs/medicines issuedby the concerned drug licensing authority to the buyer at the time of bid submission.8. bidder/seller shall submit a valid non-conviction certificate for last two 2 consecutive years issued by the concerned drug licensing authority to thebuyer at the time of bid submission. the certificate must have been issued within 12 months from the date of technical opening of the bid.9. bidder/seller shall submit manufacturing & market standing certificate in india issued by the concerned drug licensing authority for at least latest2 consecutive years for the drug/medicine quoted to the buyer at the time of bid submission. the drug/medicine quoted should be clearly marked andhighlighted.this would not apply to drugs, which were introduced in india less than 2 years ago. a certificate from the drug controller general india shall be requiredfor all new drug formulations to this effect.10. if a company/firm has two or more separate manufacturing units at different sites / states/region, which are not separate entities then the company willbe allowed to submit only one bid for all units but necessary document regarding separate manufacturing units will be submitted to the buyer. however, one bidder will be allowed to submit only one offer for one product.11. the manufacturer shall have in house testing facilities and valid good laboratory practice glp certificate as per schedule l1 of the drugs & cosmeticsact and rules made thereunder as amended up to date issued by central / state drug controller / fda for the quoted drugs/medicines as applicable.12. bidder/seller shall have maximum production capacity certificate section wise issued by concerned drug licensing authority highlighting the quotedproduct.13. stp standard testing procedure along with the required reference standards for non-pharmacopoeia drugs/medicines are required to be submitted bythe bidder/seller at the time of submission of the bid.14. the bidder/seller shall submit complete stability data long term stability studies and accelerated stability studies for all drugs/medicines in specifiedpacking for at least 3 batches whenever required by the buyer. for new drugs/medicines, complete stability data of 6 months period shall be acceptable.if manufacturer has licensed a formula from another company and such licensed formula is used for the product, then the stability data of the licensorshould be submitted along with licensing agreement.15. the bidder/seller should have not been blacklisted/debarred/de-registered/banned for the quoted product by any state government / central government/ central or state government s drug procurement agencies at the time of submission of bid. further, quoted drugs / medicines have not been failed inhouse testing or testing by any state government / central government / its drug procurement agencies during last two years. if any bidder/seller hasbeen blacklisted / debarred / de-registered/banned due to quality failure, such bidder/seller or their partner / director / owner shall not be permitted toparticipate in the bid.16. during the validity of the bid if the firm/company is blacklisted/debarred/de-registered/banned by any state government / central government/central orstate government s drug procurement agencies / convicted by any court of law in india, it shall be intimated to the buyer along with relevant authenticdocument by the bidder/seller firm/ company within one month.17. during

State Government

TRN :36266594 | 13 Jan, 2026

Tender Value : 20.00 Lacs

Bhilwara - Rajasthan

Tender for supply, installation, testing, commissioning and demonstration of electronic weighing bridge at kums gulabpura

corporations/Associations/Others

TRN :36272394 | 08 Jan, 2026

Tender Value : 5.07 Lacs

Fatehpur (Up) - Uttar Pradesh

Tender for repair of weighing bridge at solid waste centre malaka

Related Searched Keywords : chemical balance

List of chemical balance Tenders

Tender for supply, installation, testing, commissioning and demonstration of electronic weighing bridge at kums gulabpura

Tender for repair of weighing bridge at solid waste centre malaka

Get chemical balance Tender Alert...

Related Searched Keywords : chemical balance

State Tenders »

City Tenders »

Keyword Tenders »

Sector Tenders »

Ownership Tenders »

Indian Segment

Browse Tenders

Global Segment

Others

Get in touch with us